Manitowoc MII 302 Especificações descarregar pdf (Página 149)

Part Number STH038 5/12 147

Ice Thickness Check

The ice thickness probe is factory-set to maintain the

ice bridge thickness at 3 mm.

NOTE: Make sure the water curtain/splash shields

are in place when performing this check. It prevents

water from splashing out of the water trough.

1. Inspect the bridge connecting the cubes. It should

be about 3 mm thick.

2. If adjustment is necessary, turn the ice thickness

probe adjustment screw clockwise to increase

bridge thickness or counterclockwise to decrease

bridge thickness. Set a 7 mm gap between the ice

thickness probe and evaporator as a starting

point. Then adjust to achieve 3 mm ice thickness.

3. Make sure the ice thickness probe wire and the

bracket do not restrict movement of the probe

ADJUSTING

SCREW

ICE THICKNESS ADJUSTMENT

3 mm ICE BRIDGE THICKNESS

PLACE 7mm DRILL BIT HERE TO

SET INITIAL GAP

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 181 182

Sem comentários

Manitowoc MII 302 Especificações Página 149