Manitowoc Q130 Especificações Página 24
- Página / 40
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Maintenance Section 4
4-2
Part Number 000001130 12/08
C. Remove the Ice Thickness Probe
• Compress the side of the ice thickness
probe near the top hinge pin and remove it
from the bracket.
Ice Thickness Probe Removal
NOTE: At this point, the ice thickness probe can easily
be cleaned. If complete removal is desired follow the ice
thickness probe wire to the bulkhead grommet (exit
point) in the back wall. Pop the bulkhead grommet out of
the back wall by inserting fingernails or a flat object
between the back wall and the grommet and prying
forward. Pull the bulkhead grommet and wire forward
until the connector is accessible, then disconnect the
wire lead from the connector.
Ice Thickness Probe Cleaning
• Mix a solution of Manitowoc ice machine cleaner and
water (2 ounces of cleaner to 16 ounces of water) in
a container.
• Soak the ice thickness probe a minimum of 10
minutes.
Clean all ice thickness probe surfaces and verify the ice
thickness probe cavity is clean. Rinse thoroughly with
clean water, then dry completely. Incomplete rinsing and
drying of the ice thickness probe can cause premature
harvest.
D. Remove the Water Distribution Tube
Q210/Q270 Models
Q210/Q270 Water Distribution Tube Removal
• Loosen the two thumbscrews, which secure the
distribution tube.
• Lift the right side of the distribution tube up off the
locating pin, then slide it back and to the right.
Disassembly
• Twist both of the inner tube ends until the tabs line up
with the keyways.
• Pull the inner tube ends outward.
Q210/Q270 Water Distribution Tube Disassembly
ICE THICKNESS
PROBE
COMPRESS SIDES OF ICE
THICKNESS PROBE
!
Caution
Do not force this removal. Be sure the locating pin is
clear of the hole before sliding the distribution tube
out.
1. LIFT UP
2. SLIDE BACK
3. SLIDE TO RIGHT
DISTRIBUTION
TUBE
THUMBSCREW
THUMBSCREW
LOCATING
PIN
3
2
1
INNER TUBE
TAB
KEYWAY
INNER TUBE
- Q130/Q210/Q270 1
- UnderCounter Model 1
- Ice Machines 1
- Safety Notices 2
- Procedural Notices 2
- Read These Before Proceeding: 2
- Table of Contents 3
- Section 1 5
- General Information 5
- General Information Section 1 6
- Model/Serial Number Location 6
- Section 1 General Information 7
- Section 2 9
- Installation Instructions 9
- Location of Ice Machine 10
- Ice Machine Heat of Rejection 10
- Leveling the Ice Machine 11
- Electrical Service 12
- Water Service/Drains 13
- Installation Checklist 16
- Section 3 17
- Operation 17
- Operation Section 3 18
- Section 3 Operation 19
- Energized Parts Chart 19
- Operational Checks 20
- Section 4 23
- Maintenance 23
- Maintenance Section 4 24
- Section 4 Maintenance 25
- Section 5 33
- Before Calling for Service 33
- Safety Limit Feature 34
- Safety Limit #1 36
- Safety Limit #2 37
- Part Number 000001130 12/08 38
Manuais e produtos relacionados com Soluções para fazer cubos de gelo Manitowoc Q130
(17 páginas)
(38 páginas)
(44 páginas)Lbl-lighting MO 2.75" Round Canopy podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Oświetlenie Lbl-lighting MO 2.75" Round Canopy.
Dostarczamy 1 pdf podręczników Lbl-lighting MO 2.75" Round Canopy do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Comentários a estes Manuais